Beringer Water Ring Pelletizing System

Used Beringer model WRP12V water ring pelletizing system.
- System includes operator control panel, AC motor with inverter drive for cutter head, water accumulator and water pump with water reservoiir, and spin dryer.

For more details on Beringer Water Ring Pelletizing System click here

PET Recycling Line

We are looking for a PET recycling line, which at the end of all stages gives as output PET pellets.
- The line will be feeded by PET film 10-75 thickness range or grinded PET flakes.
- We are alsoo looking for the extruder that should be Erema able to have a capacity to 500 kg/hr.

For more details on PET Recycling Line click here

Repelletizing Machine

We have a set of extruder (repelletized machine) for sale.
Extruder specification:
- Year: 1983 - 1985
- Screw: 65 mm
- Motor speed: 19 ~190 rpm
- Motor: 37 KW
- Heater: 22 KW

(For images, pl

For more details on Repelletizing Machine click here

Erema Recycling Line

We are looking for an Erema 80-120 mm TVE line.
- We wish to process PE, PP and PS.
- Price range is Euro 60,000 to Euro 80,000


For more details on Erema Recycling Line click here

Plastic Film Washing Plant

Complete recycling line designed for low energy conversion of waste commercial or agricultural film to valuable resource.
- Fully automated line complete with PLC control, metal detector and water rrecycling system.

For more details on Plastic Film Washing Plant click here

Reprocessing Machine

- Year: 2009
- Rated output: 190 kg/hr
- Suitable for LD/LLD/HM
- Connected load: 120 KW
- Main Motor: 55 KW/1440 RPM


For more details on Reprocessing Machine click here

40 mm Munchy Reprocessing Line

Model: MT-058
- 40 mm barrel
- 14:1 L/D ratio
- 15 hp motor
- 17 KW max power consumption
- Dual diameter screw
- Pull roll feeder
- Two barrel heat zones
- 30 hole dry die face with heating

For more details on 40 mm Munchy Reprocessing Line click here

Recycling Equipment at Attractive Price

1) Used 90mm Barmag 30/1 L/D non-vented extruder
- Year: 1999
- Barrel centerline height 39", electrically heated, air cooled
- Extruder is type 9E10/30D
- Gearbox model 9E805-32/6V
- Has water ccooled top center feed throat 4.

For more details on Recycling Equipment at Attractive Price click here

Beringer Water Ring Pelletizing System

Used Beringer model WRP-36 water ring pelletizing system.
- Pelletizer equipped with 7.5 hp AC motor with inverter for variable speed control.
- Has die plate, water ring, water accumulator, 3 hp wwater pump, water reservoir and carter day model D312 spin dryer with motor.

For more details on Beringer Water Ring Pelletizing System click here

6" Conair Strand Pelletizer

6" Conair model 206S strand pelletizer.
- Has 6 hp AC motor with inverter for speed control.
- Includes operator controls.

(For images, please see next pages)


For more details on 6" Conair Strand Pelletizer click here

Gala Underwater Pelletizer

Gala underwater pelletizer model 6:
- Includes Gala spin dryer model 8.1B/F
- 80 gpm water tempering system with water pump and heat exchanger, and operator control panel.
- Pelletizer is driven b

For more details on Gala Underwater Pelletizer click here

Erema Recycling Line

Model: Erema 80 T recycling line
Colour:
- Machine: RAL 6011
- Switch cabinet/control desk/terminal box: RAL 7032

Electrical data:
- Voltage: 3 x 415 V
- Control voltage: 220 V
- Frequency: 50 Hz
- Connected load: 230 kW
- Phases: 3
- Insulation class: F
- Type of enclosure: IP54

The electrical equipment corresponds with IEC recommendations and VDE regulations.

For more details on Erema Recycling Line click here

Cincinnati Milacron Hot Cut Pelletizing System

Previously used on CM92 twin screw extruder, 3 blades cutting head driven by 3 hp A/C motor, includes electrically heated 300 3/32" hole die plate, conveyor blower, regular blower, cyclone with stand,, dual channel vibratory airbed, and controls, ran up to 1800 lbs/hr PVC, mfg 1990.

For more details on Cincinnati Milacron Hot Cut Pelletizing System click here

Erema Recycling Line

Erema RGA 120 TVE with RM 120 TVE equipment combination
- Belt conveyor model FB 7000/900 with metal detector
- Cutter compactor 1500 mm Diameter 90 KW AC motor
- 120 TVE extruder 38:1 L/D with douuble vacuum system and Speck liquid ring vacuum pump driven by 160 KW Siemens AC motor with Simovert Master Drive vector controller
- SW 4/170 RTF back flush melt filter
- HG 240 hot face pelletizing system
- GS 2000 inline pellet dewatering screen
- Kongskilde model TRL 20 injector blower/pellet drying conveyor
- Stainless Steel cyclone on stand
- All electrical panels and operator control station panel with manuals and drawings
- This unit ran HDPE bags.

For more details on Erema Recycling Line click here

Erema Recycling Line for PET Flakes

We need Erema recycling line to recycle PET bottle flakes into granules
Details of PET bottle flakes:
- IV: 0.50 to 0.60
- Size: 3 to 8 mm
- Foreign particles:
a. PVC content: upto 0.50 percent

b.

For more details on Erema Recycling Line for PET Flakes click here

Chinese Recycling Line made to Canadian Standards

Our Recycling machine is made in China and it's brand new.
- It comes with a twin screw to single screw extruder (D150 MM L/D= 30:1).
- It's standards are Canadian based.
- It has a Siemens main motor (120 HP AC motor).

For more details on Chinese Recycling Line made to Canadian Standards click here

NGR or Erema Pelletizing Line

We are looking for NGR or Erema hot die pelletizing system as follows:
- Acceptable age: 5 to 10 years old
- Output: 300 to 350 kg/hr.
- Budget price: Euro 100,000


For more details on NGR or Erema Pelletizing Line click here

7.5 HP Beringer Water Ring Pelletizing System

Used Beringer model WRP-36 water ring pelletizing system. Pelletizer equipped with 7.5 hp AC motor with inverter for variable speed control. Has die plate, 4-blade cutter hub assembly, water ring, watter accumulator, 3 hp water pump and water reservoir.

For more details on 7.5 HP Beringer Water Ring Pelletizing System click here

Gala Underwater Pelletizing System

Used Gala model 6MUP underwater pelletizing system. Includes cutter with 25 hp brushless DC drive system, 160 gpm water tempering system with sieve, plate/frame heat exchanger, 20 hp water pump, and mmodel 12.

For more details on Gala Underwater Pelletizing System click here